Wireless Microphone Transmitters & Receivers,EXJOY 5.8GHz Rechargeable Microphone Wireless System for Dynamic Microphone, Audio Mixer, Amp and Camera

Price: $99.59
(as of Mar 16, 2021 05:15:31 UTC – Details)

Product introduction
Thank you tor purchasing this wireless microphone system MW-01!
It’s specially designed for moving-coil microphone, changing microphone into wireless one, user-friendly setup and Without cables.
suitable for various venue.
Transmitter and Receiver Pairing
The default setting for MW-0I microphone wireless system is Channel 1, if you want to use other channels, please proceed according to the following steps:
1. Turn on the receiver and the transmitter.
2.Connect the receiver to the microphone and the transmitter to the mixer or other equipment.
3.You can long press the channel switch button to pair up the channels of the receiver and the transmitter, the signal is to be paired up when the status indicator flickers blue.
4.When they’re paired successfully, the status indicators on both
Of the transmitter and the receiver become blue.

Caution
1. Do not disassemble or repair this product by yourself.
2. Do not use or store it to any heat sources. damp. dusty areas. Avoid
violent vibrations or shock.
3. Do not drop this product otherwise it may malfunction.
4. Do not use alcohol or other cleaning fluids to clean this product.
5. This product works normally only when the transmitter and the receiver pairs up. It supports one-to-one and one-to-many.
6. Please make sure the transmitter and the receiver keep a distance away from wireless router or other wireless equipment during use.
7. Obstructions between the transmitter and the receiver may affect the transmitter distance.
8. A maximum of 4 sets of transmitters and receivers can be used in the same place simultaneously.
9. If the red light flashes during use, it indicates low battery, please charge it in time.
10. Please turn off the transmitter and the receiver when not in use.
11. Due to one of the characteristics of lithium battery. there is a slight self-discharge. Therefore please charge the

There are channel indicator and battery indicator of both the transmitter and the receiver that can be adjusted at any time. When the connection is successful, the blue indicator light is always on.
Plug and play, no complicated settings are required. The default setting of the microphone wireless system is channel 1. Frequency conversion can be achieved through simple operations
Compatible with all the microphones with XLR interface. The receiver can be connected to PA systems, SLR cameras, speakers and other equipment with XLR interface.
5.Equipped with dual-port USB charging cable. It can be used for at least 5 hours after fully charged.